Mold Removal in South Venice, FL
Trusted North Port Mold Removal has spent more than 20 years on mold removal in South Venice, FL, the canal-lined neighborhood between the Intracoastal Waterway and Lemon Bay. Many homes here date back to the 1960s and 1970s, so aging plumbing behind bathroom, kitchen and laundry walls is behind most of the calls.
Request a Free Mold Inspection Quote
Mold Removal Projects Completed in South Venice, FL
Laundry Room Mold Removal completed at 1218 Alligator Dr, South Venice, FL 34293
The washing machine drain in this 1960s block home had been overflowing a little with every load, and water was wicking up the laundry room wall behind the machine. By the time the owner pulled the washer out, the drywall was black from the floor up about a foot. We sealed off the room, cut out the moldy drywall and HEPA cleaned the studs before the plumber cleared the drain line.
Turnaround Time: 2 days
Price: $1,750
Bathroom Mold Removal completed at 812 Lucaya Ave, South Venice, FL 34293
Cracked grout and a failed caulk line let shower water seep behind the tile in this home a few minutes from South Venice Beach. A musty smell in the hallway led to the wall behind the shower, where mold had spread across the backer board and studs. The crew removed the damaged section under containment, HEPA cleaned the framing and dried the cavity so the tile setter could rebuild the surround.
Turnaround Time: 2 days
Price: $2,050
Kitchen Mold Removal completed at 5307 Bayshore Dr, South Venice, FL 34293
A pinhole leak in the refrigerator ice maker line had been dripping behind the fridge in this canal home near the Intracoastal for months. Mold spread along the lower wall and into the side of the pantry cabinet, so we set up containment, removed the damaged drywall and cabinet panel and HEPA cleaned the space. A new braided line went in before the kitchen was put back together.
Turnaround Time: 2 days
Price: $2,250
Mold Removal in South Venice Bathrooms, Kitchens and Laundry Rooms
Mold Around Fixtures, Cabinets and Appliances
Bathroom ceilings, shower surrounds, kitchen sink cabinets and laundry room walls are the usual trouble spots when moisture keeps coming back. Tile and metal clean up well, while moldy drywall, cabinet backing and absorbent flooring need a closer look. Homes a short drive north in Venice run into the same trouble spots, especially in older bathrooms.
Finding the source of the dampness matters more than scrubbing the stain. A light surface cleaning can handle limited growth, but anything that has soaked through or gone soft is replaced as part of the mold removal.
Mold on Walls and Ceilings
Drywall is tricky because its paper facing feeds mold once it stays wet for a while. Ceiling panels, insulation and wall cavities can also be affected when water comes in from plumbing, roof penetrations or condensation.
Badly damaged sections are cut out, while exposed framing is cleaned and kept when it's still sound. Repairs only start after the area is dry and the original leak has been fixed.
How Moldy Materials Are Cleaned or Removed
Pulling out moldy drywall or insulation can send spores into nearby rooms, so containment barriers and HEPA air filtration go up first. That keeps the rest of the house clean while the work is underway.
Surfaces worth saving are HEPA vacuumed and damp wiped, and hard materials like tile and metal are the easiest to clean. Antimicrobial sprays play a small role at best, since they don't replace physical cleaning or fixing the leak.
Some materials can't be saved with surface cleaning. Moldy drywall, damaged insulation, carpet pad and some pressed wood products are removed once the growth has soaked in.
Removal stays within the damaged area instead of spreading into healthy walls, and debris is bagged carefully before it leaves the room. Sound framing stays in place once it's cleaned and dried.
Every leak behind the mold is tracked down and flagged for repair, from a cracked supply line to a failing shower seal. Dehumidifiers and air movers then run until moisture readings show the framing and slab are dry.
A final visual check confirms the work area is clean and ready for the plumber, tile setter or drywall crew. Independent clearance testing can also be arranged for bigger jobs.
Get a Free Mold Removal Quote in South Venice, FL
Trusted North Port Mold Removal handles mold removal throughout South Venice, from the canal homes near the Intracoastal to the streets around South Venice Beach and Lemon Bay. A musty laundry room, a stained bathroom ceiling or a soft spot behind the sink is worth a free inspection and a written mold removal price before it spreads.