Mold Removal in Englewood, FL
Trusted North Port Mold Removal covers mold removal in Englewood, FL on both sides of the Sarasota and Charlotte County line, from stilt homes on Manasota Key to the older cottages around Dearborn Street. After more than 20 years in the trade, the crew knows how quickly a small roof or plumbing leak turns into a wall full of mold in this warm, salty Gulf air.
Request a Free Mold Inspection Quote
Mold Removal Projects Completed in Englewood, FL
Storm Surge Mold Removal completed at 1850 Gulf Blvd, Englewood, FL 34223
Hurricane Milton's storm surge flooded the enclosed ground floor of this stilt home on Manasota Key, and the owners found mold creeping up the walls of the downstairs storage and laundry area a few weeks later. The crew cut out the soaked drywall and insulation, HEPA cleaned the framing and ran dehumidifiers until the readings were back to normal. A written mold removal report went straight to the owners' flood insurance carrier.
Turnaround Time: 4 days
Price: $5,400
Restaurant Mold Removal completed at 245 W Dearborn St, Englewood, FL 34223
A slow drain leak under the dish station of this cafe in Old Englewood Village had rotted the cabinet base and spread mold along the back wall of the kitchen. We worked after closing on 2 nights behind plastic containment, replaced the moldy drywall and cabinet panels and HEPA cleaned the prep area. The cafe opened on schedule both mornings, and the owner kept a written record of the mold removal for the health inspector.
Turnaround Time: 2 days
Price: $2,900
Attic Mold Removal completed at 2216 Old Englewood Rd, Englewood, FL 34223
Wind from Hurricane Helene lifted a few shingles on this 1980s home near Lemon Bay, and rain dripped into the attic for weeks before a ceiling stain gave it away. The attic was sealed at the hatch, the moldy roof and trusses were HEPA vacuumed and cleaned, and the wet blown-in insulation was bagged and removed. Once the roofer finished the repair, the mold removal was signed off and new insulation went down.
Turnaround Time: 3 days
Price: $3,600
Mold Removal Services in Englewood, FL
Residential Mold Removal
A leaking supply line, a sweating AC unit or a tired roof can wet far more than the first stain that shows. Residential mold removal in Englewood starts by tracing how far the moisture went before deciding what gets cleaned and what comes out.
Tile, metal and sound wood framing usually clean up well, while soaked insulation, carpet pad and drywall are cut out and bagged. Keeping demolition to the damaged areas saves homeowners from paying to rebuild walls that were never the problem.
Drywall and Ceiling Mold Removal
Heavy rain from Hurricane Helene and the storm surge from Hurricane Milton in 2024 left plenty of Englewood walls and ceilings soaked. The same storms hit Punta Gorda just as hard, and many homes there needed the same drywall and ceiling work. Painting over stained drywall rarely works, because mold feeds on the paper facing and keeps growing underneath.
Small patches on solid, cleanable finishes can sometimes be cleaned, while soft drywall and moldy ceiling tiles are removed under containment. The framing and insulation behind them are checked and dried before any new drywall goes up.
Attic, Bathroom and Kitchen Mold Removal
Attics take on water from roof leaks and condensation, while bathrooms stay damp when the exhaust fan can't keep up. In kitchens, a slow leak under the sink or behind the dishwasher can ruin the cabinet base long before anyone notices.
During attic, bathroom and kitchen mold removal, sound framing is HEPA cleaned and kept while damaged insulation or cabinet panels are replaced. The vent, leak or condensation problem gets fixed next, so the same mold doesn't return after the cleanup.
Our Approach to Mold Removal in Englewood
Visible mold rarely shows how far the water has traveled. A roof penetration, a plumbing joint or a clogged AC condensate line can push moisture into hidden spaces long before a stain appears on the wall.
Moisture meters, humidity readings and a careful visual check show which areas are still damp. Thermal imaging helps narrow the search, although it can't confirm mold by itself, so the findings decide how big the job really needs to be.
Pulling out moldy materials stirs up spores and dust, so the rooms next to the work area are protected with plastic barriers and negative air pressure. HEPA-filtered equipment runs throughout to keep particles from spreading.
Not everything has to be thrown away. Hard surfaces and sound framing are cleaned, while heavily damaged drywall, insulation and carpet pad are bagged inside the containment before they leave the house.
Once the damaged materials are out, every remaining surface is HEPA vacuumed and wiped down. Air scrubbers keep running through this stage to catch anything stirred up along the way.
Dehumidifiers and air movers then dry the space while the leak or moisture problem gets fixed. A final visual check and moisture readings confirm the area is ready for repairs, and independent clearance testing can be added when the project calls for it.
Get Help With Mold Removal in Englewood, FL
Trusted North Port Mold Removal inspects homes and businesses across Englewood, from Manasota Key and Dearborn Street to Cape Haze and the streets along Lemon Bay. If you've spotted mold, smelled something musty or found water damage after a storm, book a free inspection and get a written price for mold removal.